ST800 OPTICAL POWER METER
ST800 Optical Power Meter, a new generation of high-performance optical network testing meter, with the characteristic of excellent performance and fast field–test, has adopted the technology of laser exploration and processing, linearity & non-linearity measurement, optical power display; the optical power can be measured directly or relatively, with the function of saving measurement results; combined with laser power, it can be used to test fiber losses, check fiber continuity, and help to evaluate transmission quality of fibers. ST800 is light and convenient to carry, it is really necessary for optical network operation and maintenance.
FUNCTIONS:
u Handhold, large LCD display
u Multi-wavelength precise measurement
u Applicable to versatile adapters
u Absolute power measurement dBm or μW
u Relative power measurement dB
u Enable to save and manage 50 groups of measured data
u Low voltage warning
u Automatic power off and energy-save design
u LED backlight display
SPECIFICATIONS:
Wavelength range（nm） 800~1600
Calibrated wavelength（nm） 850、980、1310、1550
Detector Type InGaAs
Measurement range（dBm） -45~+10
Uncertainty ±5%
Resolution: linearity display: linearity display: 0.1%； Log display: 0.01 dBm
Operating temperature（℃） 0~+40
Storage temperature（℃） -10~+60
Auto shutoff duration（min） 6
Battery-hold duration（h） 8
Battery 9V NI-MH rechargeable
Low voltage warning ≤7.2V
Weight（g ） 210
Dimensions（mm） 160×76×28
ST811 VISIBLE LASER SOURCE
ST811 Visual Laser Source is mainly used to test the fiber fault location accurately. The red light emitted from the it not only can give off from the position where the fiber is seriously curved and the covering breakage or nude fiber location, but also can give off from the connected location where is not well connected. It can test the fault location of OTDR blind-measuring area accurately with OTDR, it is a kind of light test meter, which is easy to operate.
FUNCTIONS：
1. It is portable and easy to operate
2. Optical output alternatives of CW and 2Hz
3. Low Voltage indication
4. Power off automatically and energy-save design
SPECIFICATIONS:
1. Emitter type: class 2
2. Calibrated Wavelength: 650±20nm
3. Output power: >1mw
4. Way of light output: alternative with CW and 2Hz
5. Operating temperature: 0~40℃
6. Storage temperature: -20~60℃
7. Relative humidity: 0~95%
ST810 DUAL WAVELENGTH LASER SOURCE
ST810 Dual Wavelength Laser Source can be used in every kind of fibers such as the LAN (Local Area Network), broadband network, city area network, CATV network or long-distance fiber network and so on. It is developed according to the laser emission and disposal technique, and it can provide steady light signal. It can be used to distinguish fiber, measure the wastage of fiber accurately, check the continuity and help to evaluate the transfer quality of fiber link through series of optical power meter of ST800. It provides high quality laser lamp-house for field test and development in laboratory.
FEATURES:
u Handhold, easy to operate
u Double wavelength to choose
u Output double wavelength through single port
u High stabilization
u Rechargeable battery
u Low voltage checking and power off automatically to save energy
SPECIFICATIONS:
1、 Emitter type: abry-Perot LD
2、 Calibrated Wavelength:1310±20 nm, 1550±20nm
3、 Spectral width:≤5nm
4、 Output Power:≥-7 dBm
5、 Stability in short time:≤±0.05dB/15min
6、 Stability in long time:≤±0.1dB/8h
7、 Laser output mode: CW
8、 Optical Connector: FC type adapter
9、 Output working wave monitor: LED
10、Battery：9V/160mA Ni-MH chargeable battery
11、Low voltage: 7.5 V LED indicator light
12、Low voltage shutoff:7.2V
12、Electrification duration:3-6 hours
13、Battery working duration:5 hours
14、Working temperature: 0℃ ~ 40℃
15、Storage temperature:-40℃ ~ 70℃
16、Dimension (mm):160×76×28
17、Weight: 0.22Kg
ST801 Optical Multimeter
ST801 Optical Multimeter is a new kind of test product for optical network. Portable, intelligent, combines optical source, optical power meter as one. There are 1310nm and 1550 nm dual wavelength output optical source inner. It can supply the steady optical source and functions of optical power meter, and it realizes the loop test and two-way automatic test. Its single end test solution advance the test efficiency. The inner microprocessor and linearity magnify technology ensure the long time calibration, and it can test accurately.
ST801Optical Multimeter not only can carry out the absolute and relative power test, but also can finish the optical loss test for fiber, optical cable and optical non power parts automatically, and to save the test data. It is suitable to operate for construction, maintenance work of fiber communication, CATV system, meanwhile, it is used for laboratory test and research work. It is an ideal portable tool for fiber project staff.
Functions：
◆ Multi wavelength exact test
◆ Absolute power test for dBm or μW
◆ Relative power test for dB
◆ Single end dual wavelength output, switch from 1310 nm and 1550 nm
◆ 50 Groups test data store and management
◆ Multi interface adapter（FC、SC、ST optional）
◆ Handhold, large LCD display, easy to operate
◆ Under voltage indication
◆ Power-off automatically, prolong the battery life
Specifications：
The parameters for optical power meter module：
◆ Wavelength range：800～1600 nm
◆ Detector type：InGaAs
◆ Optical power test range：-45～+25dBm （ST801）
-70～+3dBm （ST801B）
◆ Unsureness：±5%
◆ Resolution：Linearity display 0.1%, logarithm display 0.01dBm
The characters for optical source module：
◆ Emitter type：Fabry_Perot LD
◆ Dual working wavelength function switch：1310±20nm、1550±20nm
◆ Chart line width：≤5nm；
◆ Output optical power：≥-7 dBm
◆ Output optical power short time steady degree：≤±0.05dB/15min
◆ Output optical power long time steady degree：≤±0.1dB/8h
Other character parameters：
◆ Under voltage indication：There is indication when battery voltage is lower than 7.2V
◆ Time for automatic power-off：6min
◆ Working duration for battery：2h (the optical source and optical power meter work synchronously) 8h (only optical power meter work)
◆ Battery：9V/160mAh N-H rechargeable battery
◆ Operating temperature：0℃～40℃
◆ Storage temperature：-10℃～+60℃
◆ Weight: 0.2Kg
◆ Dimension：160mm×76 mm×28 mm
|
|
|
|
|
